Ip Address; Server Configuration - Vitek VTC-TNB42R3F User Manual

Ip camera series transcendent series 3 megapixel outdoor wdr ip cameras with up to 150’ ir range

Hide thumbs Also See for VTC-TNB42R3F:

Table of Contents

Transcendent Series: IP Cameras

2. Input port number for web access in the "HTTP Port" textbox.

3. Input the port number for audio & video transmission in the "Data Port" textbox.

3.4.2 IP Address

1. Go to "Network Configuration"# "IP Address" to see the interface shown below.

2. There are two options for IP setup: obtain an IP address automatically by DHCP

protocol and use the following IP address. You may choose one of the options as

required.

3. Use the following IP address: display the IP address, subnet mask, gateway and

DNS of the device.

4. PPPoE: User needs to manual input the user name and password for dial-up internet.

First, log in web client and then enter user name and password of PPPoE, save the

setting and exit. Second, set up IP address change notice. Third, connect with Modem.

The device will dial up internet automatically.

5. Press the "Save" button to save the settings.

Go to "Network Configuration"# "Server Config".

Table of Contents

Vtc-tnb36r3v Vtc-tnt30r3f Vtc-tnt30r3v Vtd-tnd30r3v