Wan Configuration - Vitek Transcendent Series Quick Start Manual

2. Open the IE Browser and input the default address of IP-CAM and
confirm. The IE browser will download Active X control automatical-
ly.
3. After downloading Active X control, the login dialog box will pop up.
4. Input the default username and password and then enter to view.

WAN Configuration

Access the camera by the router or virtual server for example.
1. Make sure the camera is connected to the LAN; Then log into the
camera via LAN and go to System Congfig→Network Config→Port
menu to set up the port number.
2. Enter System Config→Network Config→IP Address menu to modify
the IP address.
3. Go to the router's management interface through IE browser to
forward the IP address and port of IP-CAM in the "Virtual Server".
4. Open the web browser and input its WAN IP and HTTP port to
access the IP-CAM.
8