Transcendent Series: IP Cameras
OSD Config, Video Mask and ROI Config.
3.2.1 Camera Configuration
Setting steps:
1. Go to "Video Configuration" # "Camera" interface as shown below.
2. You may adjust frequency, brightness, contrast, hue and saturation of the picture.
3. Select white balance mode.
4. Wide dynamic, sharpen and denoise are adjustable.
5. You can also set the image mirror and image flip function.
6. Press the "Save" button to save the settings.
3.2.2 Video Stream
Go to "Video configuration" # "Video Stream" to see an interface as shown below.
Three video streams can be adjustable.
Resolution: The higher the resolution, the clearer the image is.
Frame rate: The higher the frame rate, the more fluency the video is. However, more
storage room will be used.
Bitrate type: CBR and VBR. CBR means that no matter how much the video changes,
the compression bitrate keeps constant. This will not only facilitate the image quality
better in a constant bitrate but also help to calculate the capacity of the recording. VBR
means that the compression bitrate can be adjustable according to the changes in the
video. This will help to optimize the network bandwidth.
Video Quality: When VBR is selected, you need to choose image quality. The higher
11