Garmin Edge 810 Quick Start Manual page 3

2
Plug the small end of the USB cable
into the mini-USB port.
3
Plug the USB end of the cable into the
AC adapter or a computer USB port.
4
Plug the AC adapter into a standard
wall outlet.
When you connect the device to a
power source, the device turns on.
5
Charge the device completely.
A fully charged battery can run for up to
15 hours before it must be recharged.
Installing the Standard Mount
For the best GPS reception, position the
bike mount so the front of the Edge is
oriented toward the sky. You can install
the bike mount on the stem or the
handlebars.
1
Select a secure location to mount the
Edge where it does not interfere with
the safe operation of your bike.
2
Place the rubber disk
CD
on the back
of the bike mount.
The rubber tabs align with the back of
the bike mount so it stays in place.
3
Place the bike mount on the bike
stem.
4
Attach the bike mount securely using
the two bands
(l).
5
Align the tabs on the back of the Edge
with the bike mount notches @.
6
Press down slightly and turn the Edge
clockwise until it locks into place.
3