Garmin Edge 810 Quick Start Manual page 13

9
Select Reset
@)
on the GSC 1 0.
The LED turns red, then green.
1 0
Pedal to test the sensor alignment.
The red LED blinks each time the
pedal magnet passes the sensor. The
green LED blinks each time the spoke
magnet passes the sensor arm.
NOTE: The LED blinks for the first 60
passes after a reset. Select Reset
again if you require additional passes.
11
When everything is aligned and
working correctly, tighten the cable
ties, the sensor arm, and the spoke
magnet.
Garmin recommends that the torque is
1.9 to 2.4 lbf-in. (0.21 to 0.27 N-m) to
ensure a water tight seal on the GSC
1 0 sensor arm.
Training with Power Meters
• Go to www.garmin.com/intosports for
a list of third-party ANT+ sensors that
are compatible with your device.
• For more information, see your
owner's manual.
Customizing the Device
Profiles
The Edge has several ways for you to
customize the device including profiles.
Profiles are a collection of settings that
optimize your device based on how you
are using it. For example, you can create
different settings and views for training
and mountain biking.
When you are using a profile and you
change settings such as data fields or
units of measurement, the changes are
saved automatically as part of the profile.
Bike Profiles: You can create bike
profiles for each bike you own. The
bike profile includes optional ANT+
sensors, bike weight, wheel size,
odometer value, and crank length.
Activity Profiles: You can create activity
profiles for each type of biking. For
example, you can have a profile for
training, racing, and mountain biking.
The activity profile includes
customized data pages, alerts,
training zones (such as heart rate and
speed), training settings (such as
13