Changing Viewing Modes; Taking Screen Shots; Recording Video - Lorex LH050 ECO SERIES Instruction Manual

17 Using the PC/Mac Client Software
6. Mute: Click to mute audio (not supported).
NOTE
The LH050 Series does not support audio recording.
7. Connection Status: Shows the type of connection used.
• P2P (peer-to-peer) indicates that the video is streaming directly from the DVR to the
computer running the Client Software.
• RLY (relay) indicates that the video is streaming through a Lorex video server. While
relay mode is activated, the system will disconnect after 10 minutes of inactivity. Re-
lay mode is only used when a direct connection cannot be made between the DVR
and computer.

17.1 Changing Viewing Modes

You can change the number of channels that the system displays simultaneously (i.e.
Split-screen Mode, Single-channel Mode, etc.).
To change the DVR's viewing mode:
• Click one of the following:
• If the controls are not shown, click

17.2 Taking Screen Shots

The system can take screen shots of a selected channel during live view.
To take a screen shot of a channel:
1. Click beside the desired channel to capture an image.
2. A pop-up window opens on the bottom left corner of the window. Click Preview to view
the image or Folder to show the image in the save folder.

17.3 Recording Video

You can record video footage directly onto your local hard drive. Once the video is in your
hard drive, you can back up the video footage onto recordable media such as USB memo-
ry keys and blank CD/DVD media.
#LX400066; r. 1.0/26388/26388; en-US
.
.
70