15
Using the Main Menu
To save your system configuration to a USB flash drive (not included):
1. Insert a USB flash drive (not included) into one of the USB ports.
NOTE
The LH050 Series only has two USB ports. Saving system configuration to a USB flash drive requires
you to unplug the wireless receiver in order to plug in a USB flash drive. You will lose live feeds of all
cameras when you unplug the wireless receiver.
2. Right-click to open the Menu Bar and click Main Menu(
3. Click Advanced and select the Maintenance tab.
4. Click Save Settings.
5. Under Device List, select your USB flash drive. Click OK.
#LX400066; r. 1.0/26388/26388; en-US
).
61