Changing Viewing Modes; Taking Screen Shots - Lorex LH140 Instruction Manual

Remote Viewing Interface

Changing Viewing Modes

You can change the number of channels that the system displays simultaneously (i.e.
Split-screen Mode, Single-channel Mode, etc.).
To change the DVR's viewing mode:
• Click one of the following:
• If the controls are not shown, click

Taking Screen Shots

The system can take screen shots of a selected channel during live view.
To take a screen shot of a channel:
1 Click beside the desired channel to capture an image.
2 A pop-up window opens on the bottom left corner of the window. Click Preview to view the
image or Folder to show the image in the save folder.
If you receive an error taking a screen shot:
You may receive an error when taking a screen capture. This is caused by an Internet
Explorer security setting.
To reduce the security setting in Internet Explorer:
1 Click on Tools>Internet Options. (In IE9, click the gear icon on the top-right corner).
2 Click the Security tab.
3 De-select Enable Protected Mode.
4 Click Apply to save your settings.
5 Refresh Internet Explorer.
70
.
.