Using Playback Controls; Finding Events In The Playback Bar - Lorex LH050 ECO SERIES Instruction Manual

12 Playback
8. Click Play.
NOTE
The DVR may reduce the frame rate of recorded video when playing back more than one channel.
Playback one channel at a time for the maximum frame rate.

12.1.1 Using Playback Controls

This system features advanced playback controls that allow you to see when you have re-
corded footage and motion events on your cameras. They also allow you to use digital
zoom in playback mode or take backups from short video clips.
Playback Controls
1. Playback Bar: Continuous recordings are shown in green. Motion recording is shown
in yellow.
2. Fullscreen Mode.
3. Rewind.
4. Slow.
5. Play.
6. Pause.
7. Stop.
8. Fast Forward.
9. Zoom.
10. Video Clip Backup.
11. Mute.
12. Volume Control.
13. Change Time Range: Click one of the options to select the range of times shown in
the Playback Bar.
NOTE
Click X (located in the top-right corner) or right-click to quit playback and return to the Search Menu.

12.1.2 Finding Events in the Playback Bar

The advanced playback controls show the time and type of video footage available. Con-
tinuous recordings are shown in green. Motion recording is shown in yellow.
NOTE
Motion detection must be enabled for each channel before they will be highlighted, see 15.5 Alarm, page
49 for details.
When up to four channels are selected for playback, multiple channels are shown.
#LX400066; r. 1.0/26388/26388; en-US
23