Step 3 Of 3: Connect To The Dvr Over The Internet - Lorex LH050 ECO SERIES Instruction Manual

16 Connecting to Your DVR Over the Internet on PC or Mac
To find the Device ID:
1. The Device ID is located on a sticker on the DVR.
You can also find the Device ID by:
• Pressing the button on the front panel or remote control to open the System In-
formation window.
OR
• Right-clicking and then clicking the Main Menu button (
word (default: 000000). Then click System>Info.
2. Write down the Device ID of the DVR.

16.4 Step 3 of 3: Connect to the DVR Over the Internet

Follow the steps below to connect to the DVR over the Internet using a PC or Mac.
NOTE
Make sure to upgrade your DVR to the latest firmware version. You must have the latest DVR firm-
ware and client software to connect to the DVR over the Internet.
PC
1. Download and install the Client Software for PC from
#LX400066; r. 1.0/26388/26388; en-US
). Enter the DVR pass-
www.lorextechnology.com.
66