Step 2 Of 3: Obtain The System's Device Id; Step 3 Of 3: Connect To The System Over The Internet - Lorex LHV1000 SERIES Instruction Manual

16 Connecting to Your System Over the Internet on PC or Mac
3. Reconnect the power adapter to power the system back on.
(not required for
local viewing)

16.3 Step 2 of 3: Obtain the system's Device ID

The Device ID is a unique code that allows your system to handshake with FLIR Cloud™
servers for a secure connection over the Internet.
To find the Device ID:
1. The Device ID is located on a sticker on the system.
2. Write down the Device ID of the system.

16.4 Step 3 of 3: Connect to the System Over the Internet

Follow the steps below to connect to the system over the Internet.
Note
Make sure to upgrade your system to the latest firmware version. You must have the latest firmware
and client software to connect to the system over the Internet.
To connect to the system over the Internet:
1. Download and install the client software.
• PC Users: Download and install the Client Software for PC from
www.lorextechnology.com/support.
• Mac Users: Download and install the Client Software for Mac from
www.lorextechnology.com/support. Double click to extract the software. Then, drag
the software to Applications.
2. Once installation is finished, double-click the FLIR Cloud™ Client icon (
desktop or Applications list.
#LX400014; r. 2.0/15899/15899; en-US
(may not be exactly as
shown)
) from the
71