Tips For Moving The Machine - Samsung MultiXpress M537x series Basic Manual

Tips for moving the machine

• Use safe lifting and handling techniques. If you need to move this
machine, you need at least four people. Use the lifting handles, as
shown below. If less than four people attempt to lift the machine, it
can lead to back injury.
• When moving the machine, do not subject the control panel to hard
impacts as this may damage the screen or border of the control
panel.
• The warranty does not cover damage from falls or impacts due to
the intentional or unintentional actions of the user.
• Do not tilt or turn it upside down. Otherwise, the inside of the machine may
be contaminated by toner, which can cause damage to the machine or bad
print quality.
• Make sure at least four people are holding the machine securely.
• Lock the scanner lock.
• Moving long distances using a truck:
- Remove the finisher, optional trays, or desk and inner imaging units and
toner cartridges.
- Fasten the scanner locking screw and the 3 finisher locking screws.
- Tape trays and DSDF cover.
• Moving short distances (e.g. moving between floors) to prevent
damage from vibration:
- Remove the finisher.
374
4. Maintenance