Redistributing Toner - Samsung MultiXpress M537x series Basic Manual

Redistributing toner

When the toner cartridge is near the end of its life:
• White streaks or light printing occurs.
• Toner low related message appears on the display.
• The status LED blinks red.
If this happens, you can temporarily improve print quality by redistributing the
remaining toner in the cartridge. In some cases, white streaks or light printing
will still occur even after you have redistributed the toner.
• To prevent damage to the toner cartridge, do not expose it to light for
more than a few minutes. Cover it with a piece of paper, if necessary.
• Do not touch the green area of the toner cartridge. Use the handle on the
cartridge to avoid touching this area.
• Do not use sharp objects such as a knife or scissors to open the toner
cartridge package. They might scratch the drum of the cartridge.
• If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
1
Redistributing toner
Click this link to open an animation about redistributing toner.
1 Open the front door.
2
Toner particles can be released inside the machine but it does not mean the
machine is damaged. Contact a service representative when print quality
problems occur.
1
194
9. Troubleshooting