Samsung MultiXpress M537x series Basic Manual page 246

Understanding display messages
Message
Staple cartridge is empty The staple cartridge
or not installed. Replace has reached the end of
it its lifespan or staple
cartridge is not
installed or the staple
cartridge is not
properly installed.
Staple cartridge is low. Small amount of staple
Replace it cartridge is left. The
estimated life of staple
cartridge is close.
The clock became initial The time setting of
time. Set a time again machine is initialized.
The IPv4 address The IPv4 address is
assigned to wireless LAN used
conflicts with that of elsewhere(wieless
other system. Check it LAN).
The IPv6 address The IPv6 address is
assigned to wireless LAN used
conflicts with that of elsewhere(wieless
other system. Check it LAN).
Meaning Suggested solutions
This message appears
when the staple cartridge
is completely empty.
Replace the staple
cartridge or install the
staple cartridge. If it is
already installed, try to
reinstall the staple
cartridge. If the problem
persists, call for service.
Prepare a new staple
cartridge for a
replacement.
Set the time setting in
Machine Setup.
Check the IPv4 address or
obtain a new IP address.
Check the IPv6 address or
obtain a new IP address.
Message
The paper in finisher bin The finisher bin is full.
[number] is full. Remove
printed paper
The paper in finisher bin The finisher bin is
[number] is nearly full. nearly full.
Remove printed paper
The paper in finisher The finisher stacker is
stacker is full. Remove full.
printed paper
The paper in finisher The finisher stacker is
stacker is nearly full. nearly full.
Remove printed paper
Paper in mailbox bin The mailbox bin is full.
[number] is full. Remove
printed paper
The room temperature is The machine is in a
not suitable for this set room with improper
use. Please adjust room room temperature.
temperature
This IP address conflicts The IP address is used
with that of other system. elsewhere.
Check it
Meaning Suggested solutions
Remove papers from the
finisher bin.
Remove papers from the
finisher bin.
Remove papers from the
finisher stacker, the
machine resumes printing.
Remove papers from the
finisher stacker.
Remove papers from the
mailbox bin.
Please adjust room
temperature (see
"Adjustment" on page
317).
Check the IP address or
obtain a new IP address.
9. Troubleshooting
246