Profiles Menu; Feature Access Codes Menu - Mitel 600 Series User Manual

Mitel 600 Series DECT Phone User Guide

PROFILES MENU

When the DECT phone is delivered, it has four profiles with pre-programmed settings. A fifth
profile is available for further settings. You can change all profiles and rename them if required.
The activated profile is displayed beside the Profile symbol (
Select:
Settings

FEATURE ACCESS CODES MENU

This menu is system specific and is only offered when the functions are supported by your system.
It allows the input of certain strings (e.g. to park a line or to leave a call-back request). Contact
your system administrator for more information about these functions.
66
No profile
Normal
Headset
Meeting
Loud
<Profile 05>
Choose one of the profiles to make changes.
Profile name
Ringer volume
Ringer device
Play once
Key click
Confirm tones
Noise detection
Loud environment
Silent charging
LED incoming call
No profile can be used with this setting. The settings
you select apply.
Parameters for normal use are configured in this profile.
Parameters for using a headset are preset in this
profile.
Parameters for using the handset during meetings are
present in this profile.
Parameters for use in loud environments are preset in
this profile.
This profile is for your custom use.
Change the name of the profile, if required.
Set your preferred ring volume: Increasing or a setting
between 1 and 7.
Configure where and how ringer signaling will be done:
Ringer, Vibra call, or Corded headset.
Select whether the ringer should ring once or
repeatedly.
Switch the key click on and off.
Switch the confirmation tones on and off.
Switch the automatic noise detection for a louder ringer
on and off.
Adapt the speech quality in a loud environment.
Switch Silent charging on and off.
Switch the LED indicator for an incoming call on and
off.
) on the idle display.