Mitel 600 Series User Manual page 26

Mitel 600 Series DECT Phone User Guide
KEY
Navigation key
Right
Hands-free
Key C
Call key
(pick-up) green
End key
(hang-up) red
Number keys
Number 1
Number 2-9
Key
Key
20
DURATION STATUS
short Standby, Connection
Menus
Editor
long Standby
Connection
Editor
short Standby
Connection
Lists
short Incoming call
Lists
Editor
long Lists
Menus
Editor
short Standby
Connection
Lists
long Standby
Lists
short Standby
Connection
Incoming call
Menus/Lists
Editor
long Every status
Handset switched off
short Standby
Editor
long Standby
long Standby
short Standby
Editor
long Standby
short Standby
Editor
long Standby
DESCRIPTION
Open the profile settings (deliver setting) of
call up the programmed function.
Go forward one menu level. Usually replaces
Ok/Change
the softkey
Cursor forward one character
Program the key function
Increase volume (save with
Cursor to end of line
Set up connection with hands-free.operation
Switch listening/hands-free operation on/off
Set up hands-free connection to selected entry
Switch off the call signal for the current call
only (if supported by the system)
Delete the corresponding entry (not in phone
book lists or VIP list)
Delete the character left of the cursor
Delete the complete list (except phone book)
Return to Standby status
Delete all characters
Connection set-up
R-key function
Set up connection to selected entry
Select the redial list
Transfer the entry into predial
Off menu
End connection
Reject call (if supported by system)
Return to Standby status
Exit Editor without changes
Switch off handset
Switch on handset
Enter number into predial
Character according to table (see "Editors" on
page 23)
Connection to voice mailbox (if available)
Select the corresponding Quick Call
destination (if Quick Call programmed)
Enter * in predial
To switch between upper and lower case
when entering text
Switch call signal on/off (permanent)
Enter # in predial
Character according to table (see "Editors" on
page 23)
Key lock on
)