Charging And Durations; Battery Charging States; Battery Warning - Mitel 600 Series User Manual

Mitel 600 Series DECT Phone User Guide

CHARGING AND DURATIONS

Charging time in the charger cradle (empty battery):
• Full capacity: 2.5 hours (standard battery)
Charging time with USB charging device:
• Full capacity: 5 hours (standard battery)
Talk time:
• Standard battery - up to 15 hours (when fully charged) for North America.
• Standard battery - up to 12 hours (when fully charged) for other countries.
Standby time:
• Standard battery - up to 105 hours (when fully charged) for North America.
• Standard battery - up to 110 hours (when fully charged) for other countries.
Note: Poor radio signals (far away from the system base station) reduce the DECT phone
standby and talk times. High loudspeaker or ringer volume, frequent key activation and
display illumination, as well as active vibration alarm and Bluetooth operation, are features
that can shorten standby and talk times.

BATTERY CHARGING STATES

The charge status of the battery is indicated on the display, as follows:
Batteries are 61 - 100% charged
Batteries are 31 - 60% charged
Batteries are 11 - 30% charged
Batteries are 6 -10% charged
Batteries are 0 - 5% charged
Battery charging
• If the DECT phone is placed in the charger cradle when the battery is completely discharged,
there is no indication until a specific charge status is reached. This process can take a few
minutes and is not a malfunction.
• Even when the DECT phone is switched off, the battery slowly discharges.
• When charging, the LED lights orange; when the battery is fully charged, the LED lights green
(can be deactivated by pressing the
> LED indications > Life indication menu).

BATTERY WARNING

When the battery capacity is almost exhausted, a warning sign appears on the display and a
series of warning beeps sounds (can be deactivated by pressing the
the Audio > Attention tones menu). If you are making a call, you have approximately five
minutes' talk time left before the DECT phone switches itself off.
14
softkey and selecting the Settings > Illumination
softkey and selecting