CALLING FROM THE LOCAL CALLER LIST
Check to see which list (local / system) has been set on the display (see
page
58). Your handset stores the phone numbers of all the answered and missed calls (subject
to the phone number being transmitted). Fifty entries can be stored (the entries are limited to
thirty on the Mitel 610d and 612d).
In idle mode, press the
Use the navigation keys to select Caller list, then the name or the phone number.
Press
The following symbols identify each call type:
Press the Call key (green). The selected entry is called.
Note: You can also access the Info menu/Call list using the Navigation menu (see
Line and Idle Display" on page
in the idle state.
CALLING FROM THE SYSTEM'S CALLER LIST
Check to see which list (local / system) has been set on the display (see
Depending on whether or not the phone number is transmitted, your communication system
stores the phone numbers of missed calls or calls made while the phone was busy. Depending
on the system equipment, 30 or 50 entries can be stored.
In idle mode, press the
Use the navigation keys to select Caller list, then the name or the phone number.
Press Ok to display additional information about the entry.
Press the Call key (green). The selected entry is called.
navigation key. The Info menu appears.
to display additional information about the entry.
Received, answered call
Missed call
Rejected call
Filtered call
Forwarded call
SOS call
Call with automatic accept
18) or via the Menu Access >>> when the DECT phone is
navigation key. The Info menu appears.
Telephoning
"Settings menu" on
"Softkey
"List access" on page
60).
39