Transmission - PEUGEOT SpeedFight 3 Workshop Manual

SERVICE OPERATIONS
- Remove the inlet silencer drain plug to let
humidity and oil drip out (3).

Transmission

- Remove the transmission cover (10 screw).
Tightening torque: 10 Nm.
- Remove the paper gasket and the
two 2 centering pins.
- Hold the fixed flange with tool P/N 752237.
- Remove the fixed flange nut and washer.
- Remove the fixed flange.
Tightening torque: 55 Nm.
28
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
3
752237