Configuring The Switch; Configuring System Information; Figure 3: System Information Configuration - LevelOne GSW-4876 User Manual

4
C S
ONFIGURING YSTEM
C
ONFIGURING THE
This chapter describes all of the basic configuration tasks.
I
NFORMATION
Use the System Information Configuration page to identify the system by
configuring contact information, system name, and the location of the
switch.
P
ATH
Basic/Advanced Configuration, System, Information
P
ARAMETERS
These parameters are displayed:
System Contact – Administrator responsible for the system.
◆
(Maximum length: 255 characters)
System Name – Name assigned to the switch system.
◆
(Maximum length: 255 characters)
◆ System Location – Specifies the system location.
(Maximum length: 255 characters)
W I
EB NTERFACE
To configure System Information:
Click Configuration, System, Information.
1.
Specify the contact information for the system administrator, as well as
2.
the name and location of the switch.Click Save.

Figure 3: System Information Configuration

– 45 –
S
WITCH