LevelOne GSW-4876 User Manual page 190

| Configuring the Switch
C 4
HAPTER
Quality of Service
Configuring Port Remarking Mode
Tag Remarking Mode – Configures the tag remarking mode used by
◆
this port:
Classified – Uses classified PCP/DEI values.
■
Default – Uses default PCP/DEI values.
■
(Range: PCP – 0-7, Default: 0; DEI – 0-1, Default: 0)
Mapped – Controls the mapping of the classified QoS class values
■
and DP levels (drop precedence) to (PCP/DEI) values.
QoS class/DP level – Shows the mapping options for QoS class
■
values and DP levels (drop precedence).
PCP – Remarks matching egress frames with the specified
■
Priority Code Point (or User Priority) value. (Range: 0-7;
Default: 0)
DEI – Remarks matching egress frames with the specified Drop
■
Eligible Indicator. (Range: 0-1; Default: 0)
W I
EB NTERFACE
To show the QoS Egress Port Tag Remarking mode used for each port:
Click Advanced Configuration, QoS, Port Tag Remarking.
1.
Click on any enter under the Port field to configure the Port Tag
2.
Remarking mode.
Figure 78: Displaying Port Tag Remarking Mode
To configure the tag remarking mode:
Click Configuration, QoS, Port Tag Remarking.
1.
Click on any of the entries in the Port field.
2.
Set the tag remarking mode and any parameters associated with the
3.
selected mode.
Click Save.
4.
– 190 –