Figure 39: Configuring Global And Port Settings For Arp Inspection - LevelOne GSW-4876 User Manual

C G
ONFIGURING LOBAL AND
Use the ARP Inspection Configuration page to enable ARP inspection
globally for the switch and for any ports on which it is required.
P
ATH
Advanced Configuration, Security, Network, ARP Inspection, Configuration
P
ARAMETERS
These parameters are displayed:
Global Configuration
Mode – Enables Dynamic ARP Inspection globally. (Default: Disabled)
◆
◆ Translate dynamic to static – Click to translate all dynamic entries to
static entries.
Port Mode Configuration
Port – Port identifier
◆
Mode – Enables Dynamic ARP Inspection on a given port. Only when
◆
both Global Mode and Port Mode on a given port are enabled, will ARP
Inspection be enabled on a given port. (Default: Disabled)
W I
EB NTERFACE
To configure global and port settings for ARP Inspection:
Click Advanced Configuration, Security, Network, ARP Inspection,
1.
Configuration.
Enable ARP inspection globally, and on any ports where it is required.
2.
Click Save.
3.

Figure 39: Configuring Global and Port Settings for ARP Inspection

– 117 –
C 4
HAPTER
P S ARP I
ORT ETTINGS FOR
| Configuring the Switch
Configuring Security
NSPECTION