Mapping Protocol Groups To Ports - LevelOne GSW-4876 User Manual

Use the Group Name to VLAN Mapping Table to map a protocol group to a
M P
APPING ROTOCOL
VLAN for each interface that will participate in the group.
G P
ROUPS TO ORTS
P
Advanced Configuration, VCL, Protocol-based VLANs, Group to VLAN
C
◆
◆
P
These parameters are displayed:
◆
◆
◆
W
To map a protocol group to a VLAN for a port or trunk:
1.
2.
3.
4.
5.
ATH
U
OMMAND SAGE
When creating a protocol-based VLAN, only assign interfaces using this
configuration screen. If you assign interfaces using any of the other
VLAN menus such as the VLAN Static table
will admit traffic of any protocol type into the associated VLAN.
When a frame enters a port that has been assigned to a protocol VLAN,
it is processed in the following manner:
If the frame is tagged, it will be processed according to the standard
■
rules applied to tagged frames.
If the frame is untagged and the protocol type matches, the frame
■
is forwarded to the appropriate VLAN.
If the frame is untagged but the protocol type does not match, the
■
frame is forwarded to the default VLAN for this interface.
ARAMETERS
Group Name – The name assigned to the Protocol VLAN Group. This
name must be a unique 16-character long string which consists of a
combination of alphabetic characters (a-z or A-Z) or integers (0-9).
VLAN ID – VLAN to which matching protocol traffic is forwarded.
(Range: 1-4095)
Port Members – Ports assigned to this protocol VLAN.
I
EB NTERFACE
Click Configuration, VCL, Protocol-based VLANs, Group to VLAN.
Enter the identifier for a protocol group.
Enter the corresponding VLAN to which the protocol traffic will be
forwarded.
Select the ports which will be assigned to this protocol VLAN.
Click Save.
– 177 –
| Configuring the Switch
C 4
HAPTER
Protocol VLANs
(page 169), these interfaces