Trailing street suffix - Trailing street suffix. (Example: SW)
■
Street suffix - Street suffix. (Example: Ave, Platz)
■
House no. - House number. (Example: 21)
■
House no. suffix - House number suffix. (Example: A, 1/2)
■
Landmark - Landmark or vanity address. (Example: Columbia
■
University)
Additional location info - Additional location information.
■
(Example: South Wing)
Name - Name (residence and office occupant). (Example:
■
Flemming Jahn)
Zip code - Postal/zip code. (Example: 2791)
■
Building - Building (structure). (Example: Low Library)
■
Apartment - Unit (Apartment, suite). (Example: Apt 42)
■
Floor - Floor. (Example: 4)
■
Room no. - Room number. (Example: 450F)
■
Place type - Place type. (Example: Office)
■
Postal community name - Postal community name.
■
(Example: Leonia)
P.O. Box - Post office box (P.O. BOX). (Example: 12345)
■
Additional code - Additional code. (Example: 1320300003)
■
Emergency Call Service – Emergency Call Service (e.g. 911 and
◆
others), such as defined by TIA or NENA.
ELIN identifier data format is defined to carry the ELIN identifier as
used during emergency call setup to a traditional CAMA or ISDN trunk-
based PSAP. This format consists of a numerical digit string,
corresponding to the ELIN to be used for emergency calling.
Policies – Network Policy Discovery enables the efficient discovery and
◆
diagnosis of mismatched issues with the VLAN configuration, along with
the associated Layer 2 and Layer 3 attributes, which apply for a set of
specific protocol applications on that port. Improper network policy
configurations are a very significant issue in VoIP environments that
frequently result in voice quality degradation or loss of service.
Policies are only intended for use with applications that have specific
"real-time" network policy requirements, such as interactive voice and/
or video services.
The network policy attributes advertised are:
Layer 2 VLAN ID (IEEE 802.1Q-2003)
■
Layer 2 priority value (IEEE 802.1D-2004)
■
Layer 3 Diffserv code point (DSCP) value (IETF RFC 2474)
■
– 163 –
| Configuring the Switch
C
4
HAPTER
Link Layer Discovery Protocol