Configuring Port Remarking Mode; Figure 77: Displaying Egress Port Shapers - LevelOne GSW-4876 User Manual

Configuring QoS Egress Port Scheduler, Queue Scheduler and Port Shapers
This configuration page can be access from the Port Scheduler or Port
Shaper page. Refer to the description of these parameters under
"Configuring Egress Port
W
To show an overview of the rate for each queue and port:
1.
2.

Figure 77: Displaying Egress Port Shapers

Use the QoS Egress Port Tag Remarking page to show an overview of QoS
C P
ONFIGURING ORT
Egress Port Tag Remarking mode. Click on any of the entries in the Port
R M
EMARKING ODE
field to configure the remarking mode using classified PCP/DEI values,
default PCP/DEI values, or mapped versions of QoS class and drop priority.
P
Advanced Configuration, QoS, Port Tag Remarking
P
These parameters are displayed:
Displaying Port Remarking Mode
◆
◆
I
EB NTERFACE
Click Advanced Configuration, QoS, Port Shaper.
Click on any enter under the Port field to configure the Port Scheduler
and Shaper.
ATH
ARAMETERS
Port – Port identifier.
Mode – Shows the tag remarking mode used by this port:
Classified – Uses classified PCP (Priority Code Point or User
■
Priority) and DEI (Drop Eligible Indicator) values.
Default – Uses default PCP/DEI values.
■
Mapped – Uses mapped versions of QoS class and drop precedence
■
level.
– 189 –
C
HAPTER
Scheduler".
| Configuring the Switch
4
Quality of Service