Attaching The Curved Brackets To The Seat Frame - Invacare Top End T-5 7000 Series User Manual

Top End® Sports Series
4.6 Attaching the Curved Brackets to the Seat
Frame
30
1. Remove the large bolts E from the bag and set them aside.
These are extra bolts and will not be used.
2. Attach the curved brackets to the seat frame by:
Aligning the curved bracket A to the inside of the welded
a.
tabs B on the seat frame.
Inserting the small bolts C (bagged separately) from the
b.
outside of the seat frame through the seat frame and curved
bracket.
Use one flat washer, one nordlock washer, and one
nut for each bolt.
Using a 10 mm wrench and a 4 mm Allen wrench D tighten
c.
the bolt into place.
Leave brackets slightly loose so they can be adjusted and
attached to base frame.
1171910-A~15