Using A New Transmitter; Pairing A New Transmitter With Training Computer - Polar Electro RCX5 User Manual

ENGLISH

10. USING A NEW TRANSMITTER

Using a New Transmitter
If you purchase a new WearLink+ Hybrid transmitter or a new WearLink W.I.N.D. transmitter as an
accessory, it has to be introduced to the training computer. This is called pairing and takes only a few
seconds. Pairing ensures that your training computer receives signals from your accessory only, and
enables disturbance-free training in a group.
Please note that WearLink W.I.N.D. transmitter does not measure heart rate in water.

Pairing a New Transmitter With Training Computer

Wear the transmitter and make sure that you are not near (40 m/131 ft) other Polar WearLink Hybrid/
WearLink W.I.N.D. transmitters.
1. Go to
Menu > Settings > Sport profiles > Sport > Heart rate transmitter > Search new
2. The training computer starts searching for the transmitter signal,
is displayed.
transmitter
3. Once the new transmitter is identified,
complete.
4. If the search is not successful,
interfering. Move further.
5. Select to start the search again.
YES
6. Select to cancel the searching.
NO
7. To return to time mode, press and hold the BACK button.
40 Using a New Transmitter
Heart rate transmitter is found
Heart rate transmitter not found
, Try again? YES / NO is displayed.
Searching for new heart rate
is displayed. Pairing is
or
Other heart rate transmitters
and press OK.