Polar Electro RCX5 User Manual page 35

This selection is only available if connection to any of the sensors has been lost.
• Select
Calibrate stride sensor
The option is only available when s3+ stride sensor is in use.
• Select Training sounds
• Select
Set automatic lap off
This selection is only available if speed information is available i.e. optional CS speed sensor for cycling or s3+
stride sensor for running has been set on for the sport profile.
• Select and select
Reset trip
This selection is only available if speed information is available i.e. optional CS speed sensor or s3+ stride
sensor has been selected on for the sport profile.
• or
Set timing view on
• Select
Countdown timer
• Set automatic lap off
selecting
Set automatic lap on
The option is only available when distance information is available i.e. optional s3+ stride sensor, cycling
speed sensor or GPS sensor is in use.
• Select Location to view your location coordinates and number of satellites visible. The optional GPS sensor
required.
• Select
Show zone limits
This selection is only available if heart rate transmitter is set on.
to calibrate s3+ stride sensor.
and set training sounds
or .
On
.
Yes/No Trip reset
off
. Start the countdown timer or set time.
to disable the automatic lap taking. If automatic lap is off, you can set it on by
.
if you want to see the sport zone heart rate limits.
Off , Soft , Loud or Very loud
is displayed.
ENGLISH
Settings 35