Pairing A New Stride Sensor With Training Computer - Polar Electro RCX5 User Manual

ENGLISH
5. Select to start the search again.
YES
6. Select to cancel the searching.
NO
7. To return to time mode, press and hold the BACK button.

Pairing a New Stride Sensor With Training Computer

Make sure the stride sensor has been correctly attached to your shoe. For more information on setting up
the stride sensor refer to the user manual of the stride sensor or to the video tutorial at
http://www.polar.fi/en/support/video_tutorials.
1. Go to >
Menu Settings
2.
Searching for new stride sensor
sensor signal.
3. Once the new stride sensor is identified,
4. If the search is not successful,
,
further. Try again? YES / NO
5. Select to start the search again.
YES
6. Select to cancel the searching.
NO
7. To return to time mode, press and hold the BACK button.
42 Using a New Accessory
> >
Sport profiles Running
is displayed. The training computer starts searching for the stride
Stride sensor found
Stride sensor not found
is displayed.
> >
Stride sensor Search new
is displayed. Pairing is complete.
or
Other stride sensors interfering. Move
and press OK.