Training; Wear The Transmitter - Polar Electro FT40 User Manual

3. TRAINING

Wear the Transmitter

Wear the transmitter to measure heart rate.
1. Wet the electrode areas of the strap under running water.
2. Attach the connector to the strap. Adjust the strap length to fit
tightly but comfortably.
3. Tie the strap around your chest, just below the chest muscles, and
attach the hook to the other end of the strap.
4. Check that the wet electrode areas are firmly against your skin and
that the Polar logo of the connector is in a central and upright
position.
Detach the connector from the strap after every use, to maximize the
transmitter battery lifetime. Sweat and moisture may keep the electrodes
wet and the transmitter activated. This will reduce the transmitter battery
life.
See detailed washing instructions in Important Information chapter.
For video tutorials, go to http://www.polar.fi/en/support/video_tutorials.
ENGLISH 9