Rebooting The Equipment - Oki ES9455 MFP Software Setup Manual

8.[Administration] Tab Page

Rebooting the equipment

An administrator can reboot the equipment. If rebooting is performed, warming-up may take longer than normally.
Rebooting the equipment
1
Start TopAccess access policy mode.
P.22 "Access Policy Mode"
2
Click the [Administration] tab.
3
Click the [Maintenance] menu and [Reboot] submenu.
The Reboot submenu page is displayed.
4
Click [Reboot] to reboot the equipment.
The confirmation dialog box appears.
5
Click [OK].
The equipment is restarted.
While the equipment is being restarted, the network will not be available. TopAccess will display "Please restart
after waiting a few minutes.". The touch panel will display "NETWORK INITIALIZING". When this "NETWORK
INITIALIZING" message disappears, TopAccess will once again be available.
[Maintenance] How to Set and How to Operate
8 [Administration] Tab Page
311