Displayed Icons - Oki ES9455 MFP Software Setup Manual

2 [Device] Tab Page

Displayed Icons

When the equipment requires maintenance or when an error occurs with the equipment, icons indicating the status
information appear near the graphic image of the equipment on the TopAccess [Device] tab. The following are the icons
displayed and their descriptions.
Printer Error 1
Printer Error 2
Cover Open
Tray Open
Toner Empty
Waste Toner Full
Paper Empty
Paper Misfeed
Staples Empty
Call for Service
28 Displayed Icons
This icon indicates that a non-recommended toner cartridge is being used, and that the
equipment has stopped printing. For information on resolving the error, refer to "Replacing a
Toner Cartridge" in the Troubleshooting Guide.
This icon indicates one of the following:
You need to remove paper from the receiving tray.
You need to remove paper from the Finisher tray.
You need to remove the staples jammed in the Finisher. For information on resolving the
error, refer to "Staple Jam in the Finisher" in the Troubleshooting Guide.
You need to remove the staples jammed in the Saddle Stitch Unit. For information on
resolving the error, refer to "Staple Jam in the Saddle Stitch Unit" in the Troubleshooting
Guide.
You need to clear chads from the Hole Punch Unit. For information on resolving the error,
refer to "Cleaning the Hole Punch Dust Bin" in the Troubleshooting Guide.
A non-recommended toner cartridge is being used. For information on resolving the error,
refer to "Replacing a Toner Cartridge" in the Troubleshooting Guide.
You performed saddle stitch printing with the paper of the different sizes.
The equipment cannot load paper from the Large Capacity Feeder.
The equipment cannot eject the paper to the output tray.
This icon indicates a cover such as the front cover or Automatic Duplexing Unit Cover is open.
This icon indicates the tray is open.
This icon indicates no toner is left. For information on resolving the error, refer to "Replacing a
Toner Cartridge" in the Troubleshooting Guide.
This icon indicates the waste toner box is full and requires replacing. For information on
resolving the error, refer to "Replacing the Waste Toner Box" in the Troubleshooting Guide.
This icon indicates no paper is left in a tray. For information on resolving the error, refer to the
Copying Guide.
This icon indicates a paper misfeed occurred. It also indicates the location of the paper misfeed.
For information on resolving the error, refer to "Clearing a Paper Misfeed" in the
Troubleshooting Guide.
This icon indicates no staples are left in the Finisher. For information on resolving the error, refer
to "Refilling the Staples" in the Troubleshooting Guide.
Contact your service representative to have the equipment inspected.