8 [Administration] Tab Page
Setting up LLTD Session
Enable this setting for confirming the device connection status, installing devices or accessing the TopAccess. This setting
also allows you to discover the desired device over the local network and view device information such as location, IP
address, MAC address or profile on the Network Map under the Windows Vista/Windows 7/Windows Server 2008
environment.
1
2
Item name
1
Enable LLTD
2
Device Name
Setting up Wake Up Setting
This section describes how to set network access during the Super Sleep mode.
Use this setting for a case such as when you want to recover this equipment from the Super Sleep mode by searching this
equipment over a network.
This setting can be enabled only when [Enable] is selected for the Super Sleep mode setting. If not selected, the Wake
Up setting is disabled because this equipment does not enter the Super Sleep mode.
P.145 "Setting up Power Save"
1
174
[Setup] Item List
Select whether the LLTD setting is enabled or disabled.
Enable — Enables the LLTD.
Disable — Disables the LLTD.
Enter a device name to be displayed on the Network Map.
You can enter up to 16 characters and symbols other than =, ; (semicolon), #, and
\ (backslash).
Description