8.[Administration] Tab Page
Print Service settings
You can configure such print services as Raw TCP Print, LPD Print, IPP Print, FTP Print, NetWare Print, and Email Print.
The [Print Service] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Setup] menu:
P.22 "Access Policy Mode"
P.140 "[Setup] Item List"
Some settings may not be reflected on the touch panel immediately after saving them. The settings will be updated by
pressing the [RESET] button on the control panel or after an Auto Clear time period.
P.209 "Setting up Raw TCP Print"
P.209 "Setting up LPD Print"
P.210 "Setting up IPP Print"
Setting up Raw TCP Print
In Raw TCP Print, you can enable or disable the Raw TCP print service.
1
2
3
Item name
1
Enable Raw TCP
2
Port Number
When the same port number as the secondary one in the HTTP setting (SSL port number when SSL in the HTTP setting is
enabled) is selected, you cannot access TopAccess or the e-Filing web utility. If you set it by mistake, use the control panel of
the equipment to change the HTTP setting and enter the correct port number.
3
Enable Raw bi-directional
This item is available only for some models.
Setting up LPD Print
In LPD Print, you can set the LPD print options to enable the LPD/LPR print service.
1
2
3
Item name
1
Enable LPD
P.211 "Setting up FTP Print"
P.211 "Setting up NetWare Print"
P.212 "Setting up Email Print"
Enable or disable Raw TCP print service. [Enable] is set as the default.
If enabling the Raw TCP, enter the Raw TCP port number for the Raw TCP print. You can
enter a value in the range from 1024 to 32767. Generally the default value "9100" is used.
Enable or disable Raw bi-directional communication. [Disable] is set as the default.
Enable or disable LPD print service. [Enable] is set as the default.
8 [Administration] Tab Page
Description
Description
[Setup] Item List
209