Off Device Customization Architecture Settings; Setting Up Network; Setting Up Configuration - Oki ES9455 MFP Software Setup Manual

8 [Administration] Tab Page

Off Device Customization Architecture settings

Set ODCA (Off Device Customization Architecture) when you are linking external application software to services provided
by this equipment.
For details, refer to the application software manual.
The [ODCA] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Setup] menu:
P.22 "Access Policy Mode"
P.140 "[Setup] Item List"
P.218 "Setting up Network"
P.218 "Setting up Configuration"

Setting up Network

1
2
3
4
Item name
1 Enable Port
2 Port Number
3 Enable SSL Port
4 SSL Port Number

Setting up Configuration

1
Item name
1 Session Timeout(60-99999)
218 [Setup] Item List
Select whether the external connection is enabled or disabled.
Specify the port number where the external connection is enabled.
Select whether SSL is enabled or disabled for the external connection.
Specify the SSL port number where the external connection is enabled.
Specify the duration to maintain the connection.
Description
Description