Printer Settings; Setting Up General Setting - Oki ES9455 MFP Software Setup Manual

8.[Administration] Tab Page

Printer settings

You can configure how the printer works and the printer options needed for the raw print jobs.
The [Printer] submenu can be accessed from the [Setup] menu on the [Administration] tab.
See the following pages for how to access it and information on the [Setup] menu:
P.22 "Access Policy Mode"
P.140 "[Setup] Item List"
P.205 "Setting up General Setting"
P.206 "Setting up Default Raw Job Setting"
P.207 "Setting up Raw Job Setting"

Setting up General Setting

In General Setting, you can specify the printer related options.
1
2
3
4
Item name
1 Period of time to save
Private,Hold,Proof and invalid Jobs
2 LT<-->A4 / LD <-->A3
3 Wide A4 Mode (for PCL)
This item is available only for some models.
4 Restriction for Print Job
Select how long the private, hold, and test print jobs are kept. You can select in the range
from 1 to 12 hours, or from 1 to 30 days. Select [Indefinite] to retain all jobs in the queues
until a user manually deletes them. [14 Days] is set as the default. Available only when the
hard disk is installed.
Select whether to print a document intended for one paper size can be printed on paper of a
different size. For example, you can print a document set up for Letter size on A4 paper.
When disabled, this equipment will prompt users for the correct paper size. [Enable] is set
as the default.
Select whether the width of the printable area of copy paper is widened or not when you are
printing a PCL print job on A4 paper. Select [Enable] to widen it for approx. 3.5 mm / 0.14
inch (when in a portrait direction) and approx. 1.5 mm / 0.06 inch (when in a landscape
direction). Thus more data can be printed for each line. [Disable] is set as the default.
Select whether or not to restrict printing certain print jobs. Available only when the hard disk
is installed.
None — Select this to print all data.
Only Private — Select this to print private print jobs only.
Only Hold — Select this to print hold print jobs only.
Only Private/Hold — Select this to print private and hold print jobs only.
8 [Administration] Tab Page
Description
[Setup] Item List 205