Active/Reactive Power Control - Delta RPI-M8 User Manual

Vac High Off Slow T
Vac Low Off Slow
Vac Low On Slow
Vac Low Off Slow T
Fac High Off
Fac High On
Fac High Off T
Fac Low Off
Fac Low On
Fac Low Off T
Reconnection Time
7.2.6.4

Active/Reactive Power Control

User can enter this page only when the country is sets as Germany LV, Germany
MV, Italy LV, or Italy MV. User has to enter user's password before enter this
page.
Settings
21. Jun 2010 13:50
Personal Settings
Coefficients Settings
Install Settings
Active/Reactive Power Control *1
FRT
*2
*3
Same functionality as the Vac High Off T, but the time must be
set longer.
Same functionality as the Vac Low Off, but the value must be
set higher.
Same functionality as the Vac Low On, but the value must be
higher.
Same functionality as the Vac High Off T, but the time must be
longer.
The inverter will be disconnected from grid if the AC frequency
rises to this value.
The inverter will be reconnected to grid if the AC frequency
drops to this value.
If AC frequency reaches the Fac High Off value, the inverter will
be disconnected in this time.
Inverter will be disconnected from if the AC frequency drops to
this value.
Inverter will be reconnected to grid if the AC frequency rises to
this value.
If AC frequency reaches the Fac Low Off value, the inverter will
be disconnected in this time.
The time before the inverter reconnects to grid.
Password
ENT
EXIT
Figure 7-18 Active/Reactive powersetting page
Active/Reactive Power
21. Jun 2010 13:50
Power Limit
ENT
Power vs. Frequency
Constant cosφ
ENT
cosφ(P)
EXIT
Constant Reactive Power
Q(V)
21. Jun 2010 13:50
44