Turn On/Off Pv Inverter - Delta RPI-M8 User Manual

7. Turn on/off PV inverter

WARNING：BURN HAZARD
The enclosure temperature may exceed over 70°C while operating.
To avoid injury, do not touch the surface of the inverter whilst the
unit is in operation.
After installation, please ensure the AC, the DC and communication connection
are correct. Switch on the DC switch. When enough power is generated from the
PV array, the device will operate automatically and will initially 'self-test'. This
self-test takes approximately 2 minutes and will occur at first start-up of the day.
The display on the inverter includes a 320x240 pixel LCD display and LED
indicator lights to indicate inverter status. The green and red colour LED indicator
light represents different inverter statuses.
LCD Display
EXIT: Exit Menu
Down: Move Down
Figure 7-1 LCD display &control panel
ENT: Enter Menu or Confirm
LED Indicator (GRN/RED)
UP: Move Up
35