Broadcast - Muratec MFX-3530 User Manual

Broadcast

You can transmit to multiple destinations with a single operation. You do not need to
scan the document repeatedly for each individual destination.
NOTE
• USB memory cannot be included into the broadcast destinations.
• If you want to specify destinations using address book or shortcuts, set the
"Broadcast" setting to ON in advance. Specifying destinations using other than the
address book or shortcuts, the "Broadcast" setting will be turned ON automatically
when you specify multiple destinations.
• The number of destinations that can be transmitted to for a single broadcast is
indicated below.
Address book destinations and groups
Manually entered e-mail addresses
Shared folders
FTP servers
„ Using other than the address book or shortcuts
1
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen
is displayed.
2
Specify the destination.
For details on specifying the destinations, see the following pages:
•To specify an e-mail, see
•To specify a folder, see
1-6).
•To specify a FTP, see
3
Repeat step 2 to specify all the destinations.
You can confirm or delete the specified destinations. For details, see
destinations" (page
2-16 Advanced scan functions
Destinations
"Specifying destinations" (page
"Scanning to a shared PC folder by directly specifying the folder" (page
"Scanning to an FTP server by directly specifying it" (page
5-15).
Number
1,000
30
300
20
5-2).
"Checking specified
1-10).