Muratec MFX-3530 User Manual page 90

Transmission confirmation report (Tx Report)
For details, see "Checking the transmission report" (page 6-2).
Scan size
You can transmit an image scanned using a scan size set in advance. This is useful when
you want to scan a part of the document or want to specify the document size. For details,
see "Scan Size" (page 4-5).
Stamp (Option)
You can stamp on a document that has been scanned (or transmitted) using the automatic
document feeder and check it has been scanned (or transmitted). For details, see
(Option)" (page 4-10).
Next document setting (Next Doc.)
If you need to transmit a large volume of documents that cannot all fit into the automatic
document feeder at once, turn "Next Doc" on to divide scanning. You can scan both
through the automatic document feeder and on the document glass
Closed transmission (Closed Tx)
When closed transmission is set, fax messages cannot be transmitted to machines other
than this product. If a passcode is set, faxes can only be transmitted to machines that are
the same product that have the same passcode registered
ID check transmission (ID Check)
ID check transmission limits fax transmission to when the lower four digits of the fax
number you dialed and those registered in the destination machine match
Memory transmission (Memory Tx)
For details, see "Setting the memory transmission / real time transmission" (page 3-12).
Dialing options (Dialing Opt.)
For details, see "Dialing options" (page 3-10).
Broadcast transmission (Broadcast)
This function enables you to transmit the same fax to many destinations in one operation,
thereby eliminating the need to scan and transmit the fax to each individual destination.
For details, see "Broadcasting (Broadcast)" (page 3-6).
Delayed transmission (Delayed Tx)
You can use this function to specify the date and time to perform transmission. For
details, see "Delayed transmission (Delayed Tx)" (page
E-mail gateway (E Gateway)
You can transmit to a fax server as if you were transmitting to a regular telephone line.
For details, see "E-mail gateway (E Gateway)" (page
Location
You can check or delete the specified destinations at transmission. For details, see
"Checking specified destinations manually" (page 5-16).
(page 4-7).
(page 4-18).
(page
4-14).
4-17).
Introduction to advanced functions
1
2
3
"Stamp
4
4-22).
4-3