Muratec MFX-3530 User Manual page 188

Function
Dialing Pause This sets the default dialing interval used when the
pause option is input.
Rx Reduction Rate Select from "Auto" which automatically selects the
magnification according to the length of the document
being received, or "100%" to have all faxes printed out
at the same rate of reduction.
For details, see
Reduction Margin This sets at what point the document printout will
extend to the following page if the document being
received cannot fit within the effective recordable area.
For details, see
Paper Saving This sets the print method for received documents.
Quick Memory Tx If this is set to "ON", fax transmission for multiple
documents will begin in order of page when it has
been scanned and stored.
ECM Mode This mode enables any part of a fax that was
not transmitted correctly due to a line error will
automatically be resent. (The destination machine
must also have the same function.)
Service Mode Do not set this.
Prefix By registering frequently used fax numbers, you can
enter a fax number simply by pressing a button.
Up to 40 digits can be entered for a prefix number.
Numbers, #, *, /P (Pause), and /T (Tone) can be entered.
For details, see
Receive Time Stamp Prints the time that documents are received. This
enables you to accurately manage the arrival time of
received documents.
Auto Print Journal You can print a list of communication jobs.
Journal Line Up You can select whether to arrange printed journal
reports in order of job or in order of communication
number.
NOTE
Underlined values are the default settings specified at the time of shipment.
Description
"List of recording methods" (page
"Reduction margin" (page
"Dialing options" (page 3-10).
Settings
0 - 10 Seconds:
2 Seconds
Auto
100 %
3-22).
0 - 3.3 ":
1.6 "
3-23).
OFF
Duplex Rx
OFF
ON
OFF
ON
OFF
ON
(Not registered)
OFF
ON
OFF
ON
Reserve print
Duplex:
OFF
ON
OFF
ON
Specifying default settings
1
2
3
4
5
6
7
7-37