Muratec MFX-3530 User Manual page 56

You can set the ratio of G (green) to seven different levels, from -3 to +3.
–: Lessens green, and enhances magenta.
+: Enhances green, and lessens magenta.
-3 -2
You can set the ratio of B (blue) to seven different levels, from -3 to +3.
–: Lessens blue, and enhances yellow.
+: Enhances blue, and lessens yellow.
-3 -2
1
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen
is displayed.
2
Press [Advanced].
3
Press [Color Adjust].
4
Press [RGB].
5
Select [R], [G], or [B] you want to adjust, select the color ratio, and press [Enter].
6
Press [Close] repeatedly until the "Scan Ready" screen is displayed.
7
Specify the destinations, and press <Start>.
For details on the procedure, see
-1 0 +1
-1 0 +1
"Basic scanning" (page 1-2).
+2 +3
+2 +3
Advanced scan functions
1
2
2-27