Muratec MFX-3530 User Manual page 155

7
Press [Fax No.].
If you do not want to register a fax number, proceed to step 9.
8
Use the numeric keys to enter the fax number, and press [Enter].
Also register dialing options if you want to use them
9
Press [e-mail].
If you do not want to register an e-mail address, proceed to step 11.
10
Enter the e-mail address, and press [Enter].
11
Press [Super G3].
12
Select [ON] to enable transmission with Super G3 or [OFF] with G3, and press
[Enter].
13
If "Mode 1" is set for the pin mode, press [PIN].
Otherwise, proceed to step 15.
14
Enter the PIN, and press [Enter].
15
Press [Enter].
To continue to register or edit address book destinations, repeat the procedure from step 5.
7-4 Registering destinations
(page 3-10).