Muratec MFX-3530 User Manual page 55

„ Adjusting the lightness
You can set the image lightness (brightness and darkness) to seven different levels, from
-3 (low) to +3 (high).
–: Darkens the entire image.
+: Lightens the entire image.
-3
NOTE
To adjust lightness, set the contrast to "Normal". For details,
1
Press [Scan] on My MFP Menu screen.
If My MFP Menu screen is not displayed, press <Mode> repeatedly until "Scan Ready" screen
is displayed.
2
Press [Advanced].
3
Press [Color Adjust].
4
Press [Lightness].
5
Select the lightness, and press [Enter].
6
Press [Close] repeatedly until the "Scan Ready" screen is displayed.
7
Specify the destinations, and press <Start>.
For details on the procedure, see
„ Adjusting the RGB
You can set the ratio of R (red) to seven different levels, from -3 to +3.
–: Lessens red, and enhances cyan.
+: Enhances red, and lessens cyan.
-3
2-26 Advanced scan functions
-2 -1
"Basic scanning" (page 1-2).
-2 -1
0 +1
0 +1
+2 +3
"Contrast" (page 2-5).
+2 +3