Table of Contents
Advertisement
Symbol is described in Sec. 4.) After you have changed a waypoint
symbol, the unit will remember the one you chose and use it the
next time you save a waypoint. To revert back to the default sym-
bol, edit a waypoint and choose the original symbol, or use the Re-
set Options command (described in Sec. 5).
Create Waypoint on Map
1. Use the arrow keys to move the cursor crosshairss to the place where
you want to make a waypoint.
2. Press
|
WPT
WPT
name with a sequential number, like "waypoint 001." The waypoint
symbol and number appear on the map.
Navigate To a Waypoint
You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:
1. Press
|→ to
WPT
↓ to
|
N
ENT
EAREST
waypoint list), press
2. If your waypoint list is a long one, you can spell out the waypoint name
in the
F
B
N
IND
Y
character, then press → to move the cursor to the next character and re-
peat until the name is correct, then press
3. If the list is short, you can jump directly to the
. Use ↑ or ↓ to select the waypoint name, press
ing
ENT
point information screen appears with the
4. To begin navigating to the waypoint, press
Course line
(dotted)
Off course
range, set at
0.20 mile
Navigation Page, navigating toward waypoint 004 and leaving a trail.
www.Busse-Yachtshop.de
. The waypoint is saved and automatically given a
|
S
ENT
AVED
; or, to look by name (and scroll through the entire
. For this example, let's look by name.
ENT
box to search for it. (Press ↑ or ↓ to change the first
AME
. To look up the nearest waypoint, press
to jump to the list below.)
ENT
G
T
O
46
email: info@busse-yachtshop.de
box by press-
F
I
L
IND
N
IST
and the way-
ENT
command selected.
O
.
ENT
Waypoint
Trail line
(solid)
Destination
name
Advertisement
Table of Contents
