Advanced Options Menu; Instance - Lowrance 5300c iGPS Operation Instructions Manual

Mapping gps receiver
Hide thumbs Also See for 5300c iGPS:
Table of Contents

Advertisement

To select Fluid Type:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
US
ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press
Configuration menu will appear.
4. Press ↓ to
F
menu with the following options: Fuel, Water, Gray Water, Live Well,
Oil, Black Water and Unknown.
5. Select the desired fluid type and press
will appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
ES
main display.
To input Tank Size:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
US
ration menu. A list of network devices will be at the top of the page.
3. Select the desired fluid level and press
Configuration menu will appear.
4. Highlight
T
ANK
the tank and press Enter. The following message will appear: Are you
sure you wish to change this device's configuration?
5. Select
and press
Y
ES
main display.

Advanced Options menu

The Fuel Flow sensor Advanced Options menu contains two categories:
Instance and Restore Defaults.

Instance

The Instance command is intended for use only by experienced NMEA
2000 network technicians. Instance allows network technicians to re-
solve certain electronic probe conflicts. This is most likely to occur if the
network includes LMF-200 or LMF-400 digital gauges, which support
the display of fewer electronic probes than your GPS or sonar/GPS unit.
www.Busse-Yachtshop.de
, use ↑ ↓ to select
and press
S
ETUP
and press
T
LUID
YPE
and press
ENT
, use ↑ ↓ to select
and press
S
ETUP
and press
S
IZE
. Press
ENT
NMEA 2000
, which will open the Bus Configu-
ENT
ENT
, which will open the Fluid Type
ENT
ENT
. Press
repeatedly to get back to the
EXIT
NMEA 2000
, which will open the Bus Configu-
ENT
ENT
. Use ↑ ↓ ,← → to input the size of
ENT
repeatedly to get back to the
EXIT
138
email: info@busse-yachtshop.de
and press
. The Fluid Level Device
. The following message
and press
. The Fluid Level Device
. The
ENT
. The
ENT

Advertisement

Table of Contents
loading

Table of Contents