Table of Contents
Advertisement
To activate it, press the
tion at the time these keys are pressed is used as the man overboard
position.
Caution:
Saving a new "Man Overboard" waypoint will overwrite and
erase the previous "Man Overboard" waypoint.
Navigate Back to MOB Waypoint
Find your way back to the accident position with the Navigation Page
or Map Page. When MOB is activated, the Navigation Page automati-
cally shows the compass rose with its bearing arrow pointing toward
the man overboard position, and the destination name says "Going To
Man Overboard." The Map Page displays a Man Overboard waypoint,
represented by a human figure, and the steering arrow points where to
steer to reach that position.
Navigating to Man Overboard: Man Overboard Activated message, left,
Navigation Page, center, Map Page, right. The MOB is to the starboard
of the vessel; the GPS shows which direction to steer for the rescue.
The man overboard position is also stored in the waypoint list for fu-
ture reference. It can be edited the same as any other waypoint. This
prevents the inadvertent loss of the current Man Overboard position.
To cancel navigation to MOB, press
|
|← to
ENT
TION
tion.
Navigate to Cursor Position on Map
The
G
T
C
O
O
URSOR
the map. It's a quick way to navigate to anything you can see on-screen.
1. Use the cursor (controlled by the arrow keys) with the zoom in and
zoom out keys to maneuver around the map until you find a location
you want to go to.
ZOUT
|
. The unit stops showing navigation informa-
Y
ENT
ES
command navigates to the current cursor position on
and
keys at the same time. Your posi-
ZIN
MENU
47
|
|↓ to
MENU
C
N
ANCEL
AVIGA-
Hide quick links:
Advertisement
Table of Contents
