Save Home Waypoint menu (left). Home waypoint with X symbol and
name (right). When selected by the cursor, the pop-up box appears.
The example shows the home waypoint set at the cursor location. If the
cursor was not active, the point would be placed at the current position.
Caution:
Saving a new Home waypoint will overwrite and erase the pre-
vious Home waypoint.
Go Home
This command will automatically take you back to the Home waypoint
you created.
1. Press
|↓ to
FIND
Map Page or the compass rose on the Navigation and Compass Pages.
To cancel navigation, press
|
. The iFINDER stops showing navigation information.
Y
ENT
ES
Set Man Overboard (MOB) Waypoint
One of boating's most terrifying events is having a friend or family
member fall overboard. This unit has a man overboard feature that
shows navigation data to the location where the feature was activated.
To activate it, press the
tion at the time these keys are pressed is used as the man overboard
position.
Caution:
Saving a new Man Overboard waypoint will overwrite and erase
the previous Man Overboard waypoint.
Navigate Back to MOB Waypoint
Find your way back to the position with the Navigation Page or Map
Page. When MOB is activated, the Navigation Page automatically
shows the compass rose with its bearing arrow pointing toward the
man overboard position. The destination name says Going To Man
|
G
H
ENT
O
OME
MENU
and
ZOUT
and follow navigation arrows on the
|↓ to
C
ANCEL
keys at the same time. Your posi-
ZIN
33
Pop-up box
|
N
ENT
AVIGATION
|← to