Lowrance GlobalMap 5200C Operation Instructions Manual page 136

Mapping gps receiver
Table of Contents

Advertisement

You shouldn't need this command if you are connecting your unit to a
network with similar display units and/or a series of electronic probes.
Restore Defaults
The Restore Defaults command allows you to reset an individual EP-10
Fuel Flow Sensor's settings to factory defaults. If, for example, you exe-
cute the Restore Defaults command from your Port Fuel Flow Ad-
vanced Options menu, only the settings for the Port Fuel Flow will be
reset to factory defaults. Other fuel flows on the network will not be
affected.
To restore default settings:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Use ↑ ↓ to select the desired fuel flow and press
Configuration menu will appear.
4. Highlight
A
5. Select
R
ESTORE
appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
main display.
EP-15 Fluid Level Configuration
To input Device Name:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select a fluid level you want to rename and press
Configuration menu will appear with the Device Name dialog box high-
lighted.
4. Press
and use ↑ ↓, ← → to input the desired name for the fluid
ENT
level. Press
ENTER
play.
, use ↑ ↓ to select
and press
S
US
ETUP
O
DVANCED
PTIONS
and press
D
EFAULTS
and press
ENT
ES
, use ↑ ↓ to select
and press
S
US
ETUP
. Press
EXIT
NMEA 2000
, which will open the Bus Configu-
ENT
and press
ENT
. The following message will
ENT
. Press
EXIT
NMEA 2000
, which will open the Bus Configu-
ENT
repeatedly to get back to the main dis-
130
and press
ENT
.
repeatedly to get back to the
and press
ENT
. The
ENT
. The Device
. The
ENT
. The Device

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents