Reset Trim Calibration - Lowrance GlobalMap 5200C Operation Instructions Manual

Reset Trim Calibration

If you are not satisfied with your engine trim calibration, you can reset
engine trim calibration from the Suzuki Engine Interface Advanced
Options menu.
1. Press
MENU
2. Choose
B
US
connected to the desired engine and press
3. Highlight
A
and press
TION
re-calibrate the device?
4. Highlight
Y
main display.
Bennett Trim Tabs Calibration
Trim Tabs will be calibrated through their Device Configuration menu.
To calibrate Trim Tabs:
1. Press
MENU
devices will appear.
2. Select
B
ENNETT
the Trim Tab Device Configuration menu.
3. Highlight
C
will appear with a list of calibration instructions.
4. Select
S
TART
appear: Please fully raise Trim Tabs.
5. After fully raising the trims tabs, press
will appear: Please fully lower trim tabs.
6. After fully lowering the trim tabs, press
message will appear. Press
main display.
To Reset Calibration:
1. Press
MENU
2. Highlight
F
3. Highlight
E
appear with up to four options: All Engines, Port, Center and Star-
board. Selecting All Engines will reset calibration for all engines back
to factory defaults.
4. Select All Engines or the engine connected to the desired device and
press .
ENT
| , select
MENU
and press
S
ETUP
O
DVANCED PTIONS
. The following message will appear: Do you wish to
ENT
and press
ENT
ES
| , select
MENU
from the list and press
T T
RIM ABS
and press
ALIBRATE
and press
C
ALIBRATION
| , select
MENU
M
UEL ANAGEMENT
and press
S
NGINE ELECT
and press
NMEA 2000
. Select the Suzuki Engine Interface
ENT
and press
ENT
. Press
EXIT
and press
B S
US ETUP
. The Device Calibration window
ENT
ENT
. Press
ENT EXIT
and press
NMEA 2000
and press
ENT
. The Engine Select menu will
ENT
142
.
ENT
.
ENT
. Select Reset
repeatedly to get back to the
. A list of network
ENT
, which will open
ENT
. The following message will
. The following message
ENT
. A Calibration Complete
ENT
repeatedly to return to the
.
ENT
.
T C
RIM ALIBRA-